Butterfly mount reversing camera

This camera is primarily designed as a reversing camera, but could also be used on the front of a vehicle with a long bonnet. This is designed to be screwed or stuck to a number plate or other suitable mounting, and does not require any holes to be cut, so it can be removed later if required.

The angle of the butterfly mount can be adjusted to a limited extent by bending the mounting bracket.

Please note: this camera does not include a monitor, but has a standard Video Out connector.

Technical Information

• Camera Size: 35mm x 25mm x 25mm, plus mounting
• Waterproof and shock resistant
• 12v DC, 300mA
• High sensitivity for low light conditions
• Reversed image displayed to match that normally seen in your rear view mirror
• 628 x 586 pixel resolution (420 line PAL) with NTSC option
• Includes long video out cable, power connectors and instructions.